Products Clone

ANSI, centrifugal, regenerative turbine, boiler feed, end-suction, condensate, horizontal split case, sewage, sump, fire pumps and systems

Shredder pumps, also called cutter pumps (SK—series), are designed to shear debris before pumping. The submersible vortex pumps (SV—series) pass the entire solid. Single vane impeller pumps (S-series) are designed to pass effluent, dirty water with some solids.

Custom pumps in stainless steel and exotic metals

Clear liquids, solids handling, submersible, vortex and Reci-Prime® pumps

Seal-less, magnetically-driven chemical pumps

Vertical turbine, submersible vertical turbine in cast iron and alternate metallurgies

S-Series (sludge/slurry and general use) pumps, C-Series (chemical/and corrosive
resistant) pumps, and D—Series (duplex pumps and abrasive applications)

Progressive cavity and screw pumps

Chemical feed pumps, packages, abaque peristatic pumps,polymer mixing stations

Superchanger® plate & frame heat, exchangers, spiral & welded shell & plate

Rotary Unions for Water, Steam, Air, Hydraulic,Hot Oil, Vacuum, Coolant and Custom Applications; Deublin SINT Rotating Joints for the Paper Industry, Siphons, Paper Machine Studies, Paper Machine Dryer Software, Turnkey Dryer Section Steam and Condensate Systems, Design and Installation and service

Official Distributor of Barco Seals, Rotary Unions & Joints

A comprehensive range of of the highest quality products for the efficient use of steam and other industrial fluids

Conservation and Maintenance Reduction with Guaranteed Payback

Shredder Pumps, also called cutter pmps (SK-Series), are designed to shear debris before pumping. The submersible Vortex Pumps (SV-Series), pass the entire solid. Single Vane impeller pumps (S-Series) are designed to pass effluent, dirty water with some solids. Watch Ken & Barbie get shredded ( here).

BioprocessH2O provides modular treatment systems that operate with a single pass to supply industry with an effective treatment solution for BOD reduction, Nitrification, Denitrification and ammonia reduction with minimal operator attention. BioprocessH2O’s bioFAS™ Looped Chord Media, bioFAS™ MBBR media systems, bioFLOW Tubular Membrane Systems, BioPULSE™ Airlift™ Tubular Membrane Systems, bioTRIPURE™ Hollow Fiber Ultrafiltration Systems, provide a flexible suite of powerful solutions to the challenges facing industrial water and wastewater customers.

CBI
ClariCone Clarifiers and Filtration Equipment. Environmental Dynamics International (EDI) specializes in advanced technology aeration and biological treatment solutions for industrial wastewater treatment. Lagoon Systems, Industrial, Matrix Membrane, Fine Bubble, Coarse Bubble, Streamline, Diffuser replacement parts for most manufacturers (contact MECO for quotes).

Corrosion resistant cooling towers manufactured from Polyethylene with capacities ranging from 10 Tons to 2,000 Tons.

Packaged Cooling systems including open or closed loop heat exchangers along with skid mounted pumps and controls.

The most affordable wastewater treatment for industrial waste, agricultural waste, and industrial waste and by-product cleaning on the planet. Deskins Patented Quick-Dry Dewatering Process – RapidFloc Mixer is the first patented process to integrate state of the art technology to make thickening and de-watering on granular media an efficient, reliable, predictable, and cost effective process.

Solid/liquid separation in primary screening, scum screening and sludge thickening. Internally and externally fed rotary screens, in-channel conveyor screens/washers, sludge thickeners, screw presses & conveyors, static screens, de-gritters, septage receiver stations, sidehill screens, stand-alone screening units and shaftless screw presses and compactors. Industrially, the screens are used in meat, poultry, fish, vegetable, petrochemical and pulp and paper.

Primary treatment systems NFS – Filter systems, Gravisep – Gravity separators, NCF – Coagulation & Flocculation, Optiflot – Flotations systems

Secondary treatment systems – Bioctor – Aerobic biological treatment systems, Anoctor – Anaerobic biological treatment systems

Tertiary treatment solutions – Sand filters, Media filters, Active carbon filters, Aerated activated carbon filters, Disinfection & Membrane systems, types MF / UF/ MF and RO

Technologies for treatment of wastewater, CSO/SSO,” Volute Dewatering Press” for low maintenance solids/sludge dewatering systems, HBNR Hybrid Biological Nutrient Removal systems, “SAF” Submerged Fixed Film Bio-Reactor, raked bar screens for CSO/SSO

Innovative Ultraviolet Disinfection and Chemical Reduction Systems

Bar Screens: multi-rake, claw/rack & pinion, catenary, deep rake, traveling water, fine screens, rectangular clarifiers, conveyors, grit collectors & classifiers, bucket elevators, sludge collectors, live bottom bins, screw compactors, screw presses.

Custom pump control systems, “DigiGage” panels, SCADA systems

Low voltage drives, medium voltage drives MCC’s & custom controls.

Air release valves.

Control Valves: differentiating, pressure regulating, relief, back pressure and altitude.

Fusion-bonded epoxy coated bolted steel, field welded, shop welded and elevated liquid storage tanks for potable water, wastewater, fire protection and industrial liquids.

Engineered to withstand the most challenging of storage situations. Can replace Steel, Stainless Steel, Fiberglass & Roto-Molded plastic tanks. Made of either HIGH DENSITY LINEAR POLYETHYLENE (applications up to 120° F) or POLYPROPYLENE (high-temperature applications 180° F- 200° F), in thicknesses from W’ to 6″.

In liquid storage, Tank Connection manufactures the #1 bolted storage tank available worldwide. Tank Connection’s LIQ Fusion 7000 FBE™ coating system is a stronger system than porcelain enamel (glass) and is superior to all field applied coating systems.

Engineered to withstand the most challenging of storage situations. Can replace Steel, Stainless Steel, Fiberglass & Roto-Molded plastic tanks. Made of either HIGH DENSITY LINEAR POLYETHYLENE (applications up to 120° F) or POLYPROPYLENE (high-temperature applications 180° F- 200° F), in thicknesses from W’ to 6″.

ANSI, centrifugal, regenerative turbine, boiler feed, end-suction, condensate, horizontal split case, sewage, sump, fire pumps and systems

Shredder pumps, also called cutter pumps (SK—series), are designed to shear debris before pumping. The submersible vortex pumps (SV—series) pass the entire solid. Single vane impeller pumps (S-series) are designed to pass effluent, dirty water with some solids.

Custom pumps in stainless steel and exotic metals

Clear liquids, solids handling, submersible, vortex and Reci-Prime® pumps

Seal-less, magnetically-driven chemical pumps

Vertical turbine, submersible vertical turbine in cast iron and alternate metallurgies

S-Series (sludge/slurry and general use) pumps, C-Series (chemical/and corrosive
resistant) pumps, and D—Series (duplex pumps and abrasive applications)

Progressive cavity and screw pumps

Chemical feed pumps, packages, abaque peristatic pumps,polymer mixing stations

Superchanger® plate & frame heat, exchangers, spiral & welded shell & plate

Shredder Pumps, also called cutter pmps (SK-Series), are designed to shear debris before pumping. The submersible Vortex Pumps (SV-Series), pass the entire solid. Single Vane impeller pumps (S-Series) are designed to pass effluent, dirty water with some solids. Watch Ken & Barbie get shredded ( here).

BioprocessH2O provides modular treatment systems that operate with a single pass to supply industry with an effective treatment solution for BOD reduction, Nitrification, Denitrification and ammonia reduction with minimal operator attention. BioprocessH2O’s bioFAS™ Looped Chord Media, bioFAS™ MBBR media systems, bioFLOW Tubular Membrane Systems, BioPULSE™ Airlift™ Tubular Membrane Systems, bioTRIPURE™ Hollow Fiber Ultrafiltration Systems, provide a flexible suite of powerful solutions to the challenges facing industrial water and wastewater customers.

CBI
ClariCone Clarifiers and Filtration Equipment. Environmental Dynamics International (EDI) specializes in advanced technology aeration and biological treatment solutions for industrial wastewater treatment. Lagoon Systems, Industrial, Matrix Membrane, Fine Bubble, Coarse Bubble, Streamline, Diffuser replacement parts for most manufacturers (contact MECO for quotes).

Corrosion resistant cooling towers manufactured from Polyethylene with capacities ranging from 10 Tons to 2,000 Tons.

Packaged Cooling systems including open or closed loop heat exchangers along with skid mounted pumps and controls.

The most affordable wastewater treatment for industrial waste, agricultural waste, and industrial waste and by-product cleaning on the planet. Deskins Patented Quick-Dry Dewatering Process – RapidFloc Mixer is the first patented process to integrate state of the art technology to make thickening and de-watering on granular media an efficient, reliable, predictable, and cost effective process.

Solid/liquid separation in primary screening, scum screening and sludge thickening. Internally and externally fed rotary screens, in-channel conveyor screens/washers, sludge thickeners, screw presses & conveyors, static screens, de-gritters, septage receiver stations, sidehill screens, stand-alone screening units and shaftless screw presses and compactors. Industrially, the screens are used in meat, poultry, fish, vegetable, petrochemical and pulp and paper.

Primary treatment systems NFS – Filter systems, Gravisep – Gravity separators, NCF – Coagulation & Flocculation, Optiflot – Flotations systems

Secondary treatment systems – Bioctor – Aerobic biological treatment systems, Anoctor – Anaerobic biological treatment systems

Tertiary treatment solutions – Sand filters, Media filters, Active carbon filters, Aerated activated carbon filters, Disinfection & Membrane systems, types MF / UF/ MF and RO

Technologies for treatment of wastewater, CSO/SSO,” Volute Dewatering Press” for low maintenance solids/sludge dewatering systems, HBNR Hybrid Biological Nutrient Removal systems, “SAF” Submerged Fixed Film Bio-Reactor, raked bar screens for CSO/SSO

Innovative Ultraviolet Disinfection and Chemical Reduction Systems

Bar Screens: multi-rake, claw/rack & pinion, catenary, deep rake, traveling water, fine screens, rectangular clarifiers, conveyors, grit collectors & classifiers, bucket elevators, sludge collectors, live bottom bins, screw compactors, screw presses.

Custom pump control systems, “DigiGage” panels, SCADA systems

Low voltage drives, medium voltage drives MCC’s & custom controls.

Air release valves.

Control Valves: differentiating, pressure regulating, relief, back pressure and altitude.

Fusion-bonded epoxy coated bolted steel, field welded, shop welded and elevated liquid storage tanks for potable water, wastewater, fire protection and industrial liquids.

Engineered to withstand the most challenging of storage situations. Can replace Steel, Stainless Steel, Fiberglass & Roto-Molded plastic tanks. Made of either HIGH DENSITY LINEAR POLYETHYLENE (applications up to 120° F) or POLYPROPYLENE (high-temperature applications 180° F- 200° F), in thicknesses from W’ to 6″.

Horizontal Split Case

• Diesel and Electric Driven Available
• UL Listed/FM Approved/NFPA-20 Design
• For Commercial, Industrial and Marine Use
• Lower Initial Cost
• Quicker Delivery with Red Hot Quick Ship Program
• Ease of Maintenance

Vertical Split Case Electric Drive Fire Pump

• UL Listed/FM Approved/NFPA-20 Design
• For Commercial, Industrial and Marine Use
• Electric Driven Available

Single Stage Inline Fire Pump

• UL Listed/FM Approved/NFPA-20 Design
• For Commercial, Industrial and Marine Use
• Space Saving Vertical Design

End Suction Fire Pump

• UL Listed, FM Approved Performance>
• Electric and Diesel Speeds
• Back Pullout Design for Easy Pump Service without Disconnecting Pipe
• Frame-Mounted Design
• Small Footprint Ideal for Retrofit
• Designed for Installations such as Schools, Office Buildings, and Hospitals

Fire Pump Vertical Turbine

• UL Listed/FM Approved/NFPA-20 Design
• For Commercial, Industrial and Marine Use
• Special Materials for Seawater Applications
• Diesel and Electric Driven